CE Certification 5dB Attenuator Optical Fiber Factory – LC/SC/FC/ST Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional – RAISE
CE Certification 5dB Attenuator Optical Fiber Factory – LC/SC/FC/ST Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional – RAISE Detail:
Product Description
LC/SC/FC/ST fiber optic attenuator, also called LC/SC/FC/ST optical attenuator, is a passive device used to reduce the power level of an optical signal. Owing to that too much light can make a fiber optic receiver saturated, the light power must be reduced by using fiber optic attenuator to achieve the best fiber optic system performance. Generally, multimode systems do not need attenuators as the multimode sources, even VCSELs, rarely have enough power output to saturate receivers. Instead, single-mode systems, especially the long-haul DWDM network links, often need to use fiber optic attenuators to adjust the optical power during the transmission.
LC/SC/FC/ST fiber optic attenuator takes a number of different forms. They have different classification perspectives such as the connector type, cable type, etc. Generally, they are widely accepted to be grouped as fixed optical attenuators (FOA) and optical variable attenuators (VOA). Fixed attenuator, as the name of which has indicated clearly, is designed to have an unchanging level of attenuation in optical fiber, expressed in dB, typically between 1dB and 30dB, such as 1dB, 5dB, 10dB, etc.
Fixed optical attenuators may use a variety of principles for their functioning. Preferred optical attenuators often use either doped fibers, or misaligned splices, or total power while non-preferred attenuators often use gap loss or reflective principles.
LC/SC/FC/ST fiber optic attenuator generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications.
As optical passive devices, the LC/SC/FC/ST attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave.
Product Specification
| Fiber Connector | FC/UPC | Ferrule Type | Zirconia Ceramic |
| Connector Gender | Fixed Male to Female | Transfer Mode | SMF |
| Attenuation | 1~25dB | Operating Wavelength(nm) | 1260~1620 |
| Attenuation Accuracy | 1-9dB±0.5dB, 10-25dB±10% | Return Loss | ≥45dB |
| Polarization Dependent Loss | ≤0.2dB | Max Optical Input Power | 200mW |
| Humidity | 95%RH | Operating Temperature Range | -40 to 80°C (-40 to 176°F) |
| Storage Temperature Range | -40 to 85°C (-40 to 185°F) | ||
Product Features
● High size precision
● Fast and easy connection
● Zirconia ceramic alignment sleeve
● High wearable
● Good repeatability
● Each Attenuator 100% tested for low insertion loss
Customized FC/UPC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Customized FC/APC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Customized LC APC Fixed Fiber Optic Attenuator, Single Mode Male-Female, 1~25dB Optional
Customized LC/UPC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Customized SC/APC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Customized SC/UPC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Customized ST/UPC Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional
Fixed LC/SC/FC/ST Singlemode Fiber Optic Attenuator
• Precise attenuation values
• Low PDL & insertion loss
• Precisional reflection polishing
① Flexiable case for easy portability
Accurate size armed with elegant dust cap, better ensure the handy installation and protection from out-service.
② Durable metal shell for permanent protection
Shaped with metal material, our attenuators perfectly protect the core insert from external damage.
Attenuator Application
Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high power applications.
Performance Test
Production Pictures
Factory Pictures
Packing
PE bag with stick label (we could add customer’s logo in the label.)
Product detail pictures:
Related Product Guide:
We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for CE Certification 5dB Attenuator Optical Fiber Factory – LC/SC/FC/ST Fixed Fiber Optic Attenuator, Single Mode, Male-Female, 1~25dB Optional – RAISE , The product will supply to all over the world, such as: Belarus, Ireland, Peru, Meanwhile, we're building up and consummating triangle market & strategic cooperation in order to achieve a multi-win trade supply chain to expand our market vertically and horizontally for a brighter prospects. development. Our philosophy is to create cost-effective products and solutions, promote perfect services, cooperate for long-term and mutual benefits, firm a in depth mode of excellent suppliers system and marketing agents, brand strategic cooperation sales system.
By Sandy from Johor - 2018.12.25 12:43
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Elaine from Tunisia - 2018.09.29 13:24
