BGP

product

Wholesale MPO Patch Cord Manufacturers Suppliers – MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord – RAISE

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We're convinced that with joint endeavours, the business between us will bring us mutual benefits. We are able to guarantee you products high quality and competitive value for Multiode Simplex OM2 , Rack& Enclosures , 12Fibers Unjacketed Color-Coded Pigtails , We've been honest and open up. We glance ahead on your pay a visit to and developing trustworthy and long-term standing relationship.
Wholesale MPO Patch Cord Manufacturers Suppliers – MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord – RAISE Detail:

Product Description

MPO terminated cables are widely used in high density cabling environments like data centers. Traditional, tight-buffered multi-fibre cable needs to have each fiber individually terminated by a skilled technician. MPO cable which carries multiple fibers, comes pre-terminated. Factory terminated MPO connectors commonly have either 8fiber, 12 fiber or 24 fiber array.

The MPO connector can be either male or female. You can tell the male connector by the two alignment pins protruding from the end of the ferrule. MPO female connectors will have holes in the ferrule to accept the alignment pins from the male connector.

MPO Single Mode trunk cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles. With MPO connectors and Corning fiber or YOFC fiber, it is optimized for 40G QSFP+ PLR4, 100G QSFP28 PSM4, 400G OSFP DR4/XDR4 and 400G QSFP-DD DR4/XDR4 optics direct connection and high-density data center applications.

Product Specification

Connector MPO to MPO/LC/SC/ST/FC Fiber Count 8, 12, 24
Fiber Mode OS1/OS2 9/125μm Wavelength 1550/1310nm
Trunk Diameter 3.0mm Polish Type UPC or APC
Gender/Pin Type Female or Male Polarity Type Type A, Type B, Type C
Insertion Loss ≤0.35dB Return Loss UPC≥50dB; APC≥60dB
Cable jacket LSZH, PVC (OFNR), Plenum (OFNP) Cable Color Yellow Or Customized
Fiber Count 8Fiber/12Fiber/24Fiber/36Fiber/48Fiber/72Fiber/96Fiber/144Fiber Or Customized

Product Features

● Used to connect equipment that utilizes MPO style connectors and Single Mode OS1/OS2 9/125μm Cabling

● Type A, Type B and Type C Polarity Options available

● Each cable 100% tested for low insertion loss and Return loss

● Customized lengths and cable colors available

● OFNR (PVC), Plenum(OFNP) and Low-Smoke, Zero Halogen(LSZH)

Rated options

● Reduced Insertion Loss by up to 50%

● High Durability

● High Temperature Stability

● Good Exchangeability

● High Density design cuts down on installation costs

MPO Single Mode Connector Type

Rated options

MPO Connector Color Options

MPO Color
SM GREEN
OM1/OM2 BEIGE
OM3 AQUA
OM4 ERICA VIOLET OR AQUA

MPO to MPO Singlemode 8 Fibers Fiber Optic Patch Cord-1

MPO Single Mode 8 Fibers OS1/OS2 9/125 Fiber Patch Cord

MPO to MPO Singlemode 12 Fibers Fiber Optic Patch Cord-1

MPO Single Mode 12 Fibers OS1/OS2 9/125 Fiber Patch Cord

MPO Single Mode OS1 OS2 9 125 Fiber Patch Cord-1

MPO Single Mode 24 Fibers OS1/OS2 9/125 Fiber Patch Cord

MTP to 12x LC Single Mode

MPO to LC/UPC Single Mode 12 Fibers 9/125 OS1/OS2 Breakout Fiber Optic Patch Cord

MTP to 12xSC Single Mode

MPO to SC/UPC Single Mode 12 Fibers 9/125 OS1/OS2 Breakout Fiber Optic Patch Cord

MTP to 12x LC APC Single Mode

MPO to LC/APC Single Mode 12 Fibers 9/125 OS1/OS2 Breakout Fiber Optic Patch Cord

Polarity Type

Polarity A

In this polarity, the fiber 1 (blue) is terminated in hole 1 in each connector and so on. This polarity is often referred to as STRAIGHT THROUGH.

Polarity A

Polarity B

In this polarity, the fibers are reversed. The fiber number 1 (blue) is terminated in 1 and 12, fiber number 2 is terminated in 2 and 11. This polarity is often referred to as CROSSOVER and is commonly used in 40G applications. This is commonly used with type B mating as mentioned in the next section.

Polarity B

Polarity C

In this polarity, the fibers are divided into 6 pairs which are reversed. They are intended to be used with prefab cabling systems which will connect to breakouts (cables or modules) individual 2-fiber channels.

Polarity C

MTP Adaptor Mating

TYPE A

MTP Type A Mating Adapters mate the connectors with the key of one connector in one direction and the key of the other in the opposite direction called KEYUP TO KEYDOWN. This key alignment means that pin 1 of one connector is aligned with pin 1 of the other connector, providing a straight through connection for each fiber – e.g. blue to blue, orange to orange, all the way to aqua to aqua. This means fiber color codes are maintained through the connection.

TYPE A

TYPE B

MTP Type B Mating Adapters align the two connectors key to key or KEYUP TO KEYUP and swap the color codes of the fibers, similar to what happens in a Type B cable. Swapping fibers is necessary for aligning fibers for a 40G transceiver.

TYPE B

Custom Fiber Count

Custom Fiber Count

MPO to LC Breakout Fiber Cable

Polarity A

Polarity A-1

Polarity B

Polarity B-1

Factory Real Pictures

Factory Real Pictures

FAQ

Q: Are these in stock?

A: No, there is a lead time to build all MTP/MPO cable assemblies.

Q: What is the difference between MTP and MPO?

A: MTP is the USConec brand name MPO that we use. The terms are interchangeable.

Q: How do I know what gender I need?

A: Gender refers to the metal guide pins coming out of the endface of the MPO. Most transceivers (QSFP modules) have male pins, so you’ll need female cables to interconnect them.

Q: Where are these manufactured?

A: In our Shenzhen manufacturing plant, China

Q: If I’m connecting directly from transceiver to transceiver, what polarity cable do I need?

A: You’ll probably need a Method B Female to Female cable.

Q: Do you provide samples ?

A: Yes, we offer a sample for free charge for some items, but do not pay the cost of freight.

Q: How long is the lead time?

A: For the goods we have in stock, lead time will be within 1-2days, If not it will be 3-5 days according to quantity of the order.

Q: What is your terms of payment?

A: Payment<=100USD, 100% in advance.

Payment>=500USD, 30% T/T in advance ,balance before shippment.

Please feel free to contact us for the terms for partner.

Q: Can I print my own logo on your products?

A: Yes, of course. OEM is acceptable if the quantity can reach MOQ. We also do ODM basis on customer’s requirement.

Packing & Shipping

PE bag with stick label (we could add customer’s logo in the label.)

packing
shipping


Product detail pictures:

Wholesale MPO Patch Cord Manufacturers Suppliers –  MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord  – RAISE detail pictures

Wholesale MPO Patch Cord Manufacturers Suppliers –  MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord  – RAISE detail pictures

Wholesale MPO Patch Cord Manufacturers Suppliers –  MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord  – RAISE detail pictures


Related Product Guide:

Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Wholesale MPO Patch Cord Manufacturers Suppliers – MPO Single Mode OS1/OS2 9/125 Fiber Patch Cord – RAISE , The product will supply to all over the world, such as: Jeddah, Turkey, India, We've got a dedicated and aggressive sales team, and many branches, catering to our customers. We are looking for long-term business partnerships, and ensure our suppliers that they will absolutely benefit in both short and long run.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Alma from United Arab Emirates - 2018.06.26 19:27
    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Amber from Botswana - 2018.12.10 19:03
    Write your message here and send it to us